|
Cuzstomer: Continental India |
Industry: Automobile |
Product Name: X3 Flange |
Mold/Molding: Mold |
Approved Material: POM C (Natural Color) |
Cavitations: 2 |
Mold Type: 2-Plate and hot Runner Manifold with 2 drops |
Press Type: 500 Tons |
Parts Weight: 250 g |
Sliders: 10 |
Cycle Time: 70 sec. |
Maximum Tolerance: 0.05 mm |
Support Systems: Oil Cylinders |
Unique Features: 4 Metal Terminals to be insert molded / 3-phase of Slider Stroke |
|
|
|
|
|
Customer: Mizuno |
Industry: Sporting |
Product Name: Golf ball mold base |
Mold/Molding: Mold |
Approved Material: Stainless Steel |
Cavitations: 8 |
Mold Type: 2-Plate (Thermoplastic) |
Press Type: 160 Tons |
Parts Weight: 45.6 g |
Cycle Time: 40 sec. |
Maximum Tolerance: 0.01 mm |
Support Systems: Valve pressure |
Unique Features: Mold plate replaceable |
|
|
|
Customer: Emerson (Therm-O-Disc) |
Industry: Temperature Control |
Product Name: sensors and controls |
Mold/Molding: Molding |
Approved Material: (Themoset) |
Cavitations: 64 |
Mold Type: 2-Plate (Themoset) |
Press Type: 160 Tons |
Parts Weight: 3.5 g |
Cycle Time: 65 sec. |
Maximum Tolerance: 0.025 mm |
Unique Features: Difficulty of annealing process for accurate demission |
|
|
|
|
|
Customer: N/A |
Industry: Telecom |
Product Name: RF Switch Connector |
Mold/MoldingMolding |
Approved Material: LCP + Copper |
Cavitations: 16 |
Mold Type: 3-Plate (Thermoplastic) |
Press Type: 55 Tons |
Parts Weight: 0.025 g |
Cycle Time: 20 sec. |
Unique Features: Fully automated production |
|
|
|
Customer: Litton Winchester Electronics |
Industry: Airspace |
Product Name: Connector |
Mold/Molding: Molding |
Approved Material: DAP (Diallyl Ortho Phthalate Resin) |
Cavitations: 2 |
Mold Type: 2-Plate (Thermoset) |
Press Type: 100 Tons |
Parts Weight: 20 g |
Maximum Tolerance: General: 0.05 mm |
Unique Features: Molding shrinkage control within 0.001 - 0.004 / All holds to be concentric within 0.005 mm T.I.R. |
|
|
|
|
|